FPS Warranty Registration "*" indicates required fields Step 1 of 3 33% Building Company* Consent Number* Your Email* Site Address* Street Address Address Line 2 Town/City Post Code Date Installation Started* DD slash MM slash YYYY Date Installation Completed* DD slash MM slash YYYY Name of Authorised Building Personnel* Date BCO inspected* DD slash MM slash YYYY LBP License Number* Select Wall or Roof Installation* WALL ROOF Is the current version at hand for the FPS Weathertight System Wall Installation Manual* Yes No Membrane/Underlay:* N15 N35 W35 Membrane top edge fixed to top plate* Yes No Horizontal overlap, joins or seams adhered with tape* Yes No Vertical joins with a minimum 60mm overlap and taped* Yes No Membrane/underlay installed taut* Yes No Weathertightness* Windows and Doors installed Openings not cut out Openings covered Flexible Corner Flashing Tape installed for window & door joinery* Yes No FixingsCap & staple/screw spacings as per wind zones - Refer to FPS Wall Installation Manual* Yes No Type of construction* Timber Steel SIP Panels Where cavity battens are used, are there cap & staple/screw fixings between the cavity battens?* Yes No Where brick, stone veneer cladding is used, have cap & staple/screw fixings been used?* Yes No All fixings fitted tight and flush* Yes No Bare/plain staples covered with:* Cavity Battens Tape Finishing FPS seals correctly applied to all penetrations* Yes No Including:* Pipes Cables Heat Pump Is the builder/sub contractor aware of the correct procedure?* Yes No Are all holes, tears, and scaffold fixing points repaired?* Yes No No loose or unsecured membrane* Yes No Has correct pressure and the spatula been used with all tapes?* Yes No Building Moisture Test*Has the Timber Meet Table 4: NZS 3602:2017, Or LVL Meet Scion Table 1? Passed Not Yet Inspected Declined All other Wall Installation requirements - Refer to FPS Wall Installation ManualUpload Images of Installation*Please capture installation from all angles (minimum of 4 images) Drop files here or Select files Max. file size: 100 MB. NotesTerritorial Authority* Name of Building Inspector* Date* DD slash MM slash YYYY Additional Information or Comments Is the current version at hand for the FPS Weathertight System Roof Installation Manual* Yes No Membrane/Underlay:* N15 N35 W35 S65 Roof Structure/Truss* Timber Steel SIP CLT Membrane/Underlay is installed tight/taut* Yes No Roof Slope* Less than 5° Greater than 10° Roof Type* Hip & Gabled (Pitched) Skillion, Monopitch or SIP with no roof space Cavity Batten Type* Vertical Horizontal Cavity Batten - Horizontal* Castellated Vented Cavity Batten Fixings* Nails Screw Purlins Installed* Yes No Wind Zone* Low Medium High Very High Extra High SED Horizontal Seams sealed with FPS Approved Tape* Yes No Vertical Joins sealed with FPS Approved Tape* Yes No Penetrations (pipe and flue) sealed with FPS Seals* Yes No Holes and Tears repaired with FPS Approved Tapes* Yes No All bare staples covered* Yes No Roof valleys and apexes properly laid and sealed* Yes No Eave or gutter edge flashings installed* Yes No Air-ventilation gap behind the barge boards* Yes No Roof cladding installed within 90 days* Yes No Are all outer edges of the membrane/underlay secure against wind & water entry?* Yes No Upload Images of Installation*Please capture installation from all angles (minimum of 4 images) Drop files here or Select files Max. file size: 100 MB. Additional Information/Comments:
